• Čo získam?
  • Reklamný článok zadarmo s možnosťou troch odkazov!
Pridaj článok zadarmo

The detailed operation procedures of a crusher

24/07/13 ,

First, the preparatory work before starting

1, double-check whether the lubrication of bearings good, elbow board connections whether there is sufficient lubrication can be.

2, double-check whether I fully tighten all fasteners.

3, carefully check the drive belt is good, if they are damaged phenomenon, should be promptly replaced. When the belt or pulley when there is oil, the application of its sweeping movements cloth wipe.

4, check whether the ore crushing cavity or debris. If ore or debris must be cleaned to ensure that the no-load start-crusher.

5, check whether the return from the top bolts, gaskets if pressed, T-bolt is tightened.

Second, starting

1, upon inspection proved a normal situation in all parts of the machine before starting.

2, this machine is only allowed in case of no-load starting.

3, starting with the bell or signal must be prior notice.

4, starting later, if found to be not a normal phenomenon, should immediately stop functioning. To be identification and removal of non-normal conditions before it can start (non-regular case with easy to start).

Third, the use of

1, broken machines in normal operation before it can cast material.

2, to be broken by adding material to be evenly broken cavity. Should be avoided by adding or stacked side-feeding, so as not to overload caused by nesting uneven and should not be mechanical damage.

3, normal circumstances, the bearing temperature should not exceed 30 degrees, the maximum temperature not exceeding 70 degrees. Above that temperature, should be immediately stopped, identify causes and to be discharged only after the starter motor.Henan Hongxing Mining Machinery Co., Ltd is the professional manufacturer of complete sets of mining machinery, for example,ball mills, stone portable machine Welcome all of you to visit our official website.

4, parking, should first of all stop feeding until the broken cavity material fully discharged only after the motor shut down.

5, broken when the cavity material as a result of obstruction caused by broken parking, should be immediately stopped, the material discharged only after the re-start.

6, fixed and activities of the jaw plate wear and tear at one end, may turn around to use.

7, broken machines in use after a period of time should be set tight re-tighten the elbow sleeve, elbow sleeve to prevent the tight set loose while the machine-generated damage.

4, lubrication

1, the regular attention and in a timely manner the work of friction and lubrication can ensure the normal operation of the machine and extend equipment life.

2, this machine used grease should be based on the use of location, their conditions are, generally, under the circumstances of Ca-, sodium and calcium-based grease Kea.

3, add bearing grease inside the space where the volume for about 50% every 3 to 6 months to replace once when the application of the oil-clean gasoline or kerosene cleaning roller bearing raceway.

4, before starting the machine, elbow board and brackets should be injected into the right amount of grease.

round vibrating screen: http://www.jaw-breakers.com/T18.html

Titanium Steel Ornament

20/07/13 , , ,

Between the well known jewelry, titanium steel ornament occupies a big part. The 1st impressions of titanium steel ornament give people are interesting and cold colours, straightforward and person style and design. Titanium steel ornament is made for that modern day younger people today!

Titanium steel ornament consists of titanium steel necklace, titanium steel rings, titanium steel pendant, titanium steel bracelet and many others.

So what’s precisely titanium steel? Titanium steel is a single kind of titanium composites.

Titanium is one type of silver metal, the proportion of titanium is 4.five and melting level is 1668  C.

Titanium is usually a pretty distinctive metal. The texture of titanium is incredibly light, though quite difficult and resistant to corrosion. Titanium will not blacken like silver. Titanium will retain its colour at space temperature in all its existence.

The melting level of titanium is just like that of platinum, so titanium is usually utilized in aerospace. military precision parts.

Titanium will have varied colors by current and chemical treatment.

Why titanium steel ornament has a distinctive taste?

As a result of the above qualities of titanium, titanium will be the most proper material to become manufactured into jewellery aside from valuable metals platinum and gold. Titanium is often utilized in foreign countries in modern-day jewelry design and it is the material of global fashion jewelry.

As to the model design and style, titanium steel ornament has straightforward and clean cutting, exceptional style and design and avant-garde style. So titanium steel ornament is preferred between youthful white collar. Whilst processing technical requirements of titanium is extremely high. It is actually tricky to cast through the use of ordinary equipment and it is tough to weld by applying widespread equipment. So it really is hard to type the scale of manufacturing.

With 24 many years of practical experience in the refractory metal, which includes titanium, titanium supplier-Zhengzhou Sanhui Co., Ltd has viewed and made modifications to accommodate different market demands.

Production takes location at our own ISO 9001:2008-certified factory equipped with state-of-the-art gear.

Production process of zinc oxide with the use of rotary kiln

18/07/13 ,

For zinc oxide are used raw materials to produce those friends, you can look at today”s article. For different production processes of zinc oxide depending on the materials used, in turn, can be said to different production processes with the corresponding raw materials for production of zinc oxide. Zinc oxide produced by the three kinds of methods: zinc ingots as raw material have been indirect method (also known as the French law) and zinc ore as raw material direct method (also known as the USA and France) and wet three.

The indirect method operation process is: the electrolytic method of the ingot is heated to 600 ~ 700 ℃ after melting crucible placed in high temperature, so that the 1250 ~ 1300 ℃ high temperature melting gasification, warmed air oxidation, the resulting Zinc oxide is cooled, cyclone separation, trapping fine particles with a bag, which obtained zinc oxide products. Direct method operating side: The calcined zinc powder (or zinc materials) and anthracite (or coke quiet), the proportion of limestone by 1:0.5:0.05 formulated into balls. 1300 ℃ in a rotary kiln Neijing reduction smelting, slag zinc oxide is reduced to zinc vapor, and then pass into the air oxidized to produce zinc oxide by trapping, obtained zinc oxide products.

Wet: The reaction of zinc ash, zinc sulfate and sulfuric acid, and then with sodium carbonate and ammonia which are reacted to produce zinc carbonate and zinc hydroxide, zinc oxide as raw materials. With zinc carbonate as raw material, washing, drying, calcining, crushing obtained product zinc oxide. Zinc hydroxide as raw material, washing precipitation, drying, calcining, cooling, crushing obtained product zinc oxide. The method of production of zinc oxide is above them, can not be seen through the various production processes produce zinc oxide which raw materials are required. For convenience, summarize what ingredients are used: the zinc ingots, zinc, zinc carbonate, zinc hydroxide.

Professional production of rotary kiln, Henan Hongxing Heavy Equipment: The main products are: lime kiln, rotary kiln, ceramic sand | sand rotary kiln, rotary kiln calcium aluminate powder, laterite nickel ore rotary kiln, rotary kiln magnesium, zinc oxide rotary kiln, rotary kiln bauxite, petroleum proppant rotary kiln, rotary kiln, disc granulator, wind swept coal mill, ball mill, preheater, burners, coolers, etc..

flotation machine:http://www.hx-china.com/16.html

Fast developing pace of Hongxing crushers in China

15/07/13 ,

Overall, despite of a decade of rapid development of highway construction, ourhighway traffic construction still has huge potent. Great development of our country highway construction provides a huge market opportunity for the small crusher industry, and the high investment in highway construction provides ample economic guarantee for the development of small crusher. In the rapid development of highway construction at the same time, our country speeds up the construction of high-speed railway, and further drives the demand for small crusher.

Our country”s highway construction has entered a new period, which necessarily promotes production of crusher in batches, and drives the rapid development of mining machinery as well as technological innovation of the product.Henan Hongxing Mining Machinery Co., Ltd is the professional manufacturer of complete sets of mining machinery, for example,aggregate crushing, mobile construction station Welcome all of you to visit our official website.

At present, China”s highway mileage has reached 54000 kilometers, and the total length is second only to the United States. China will become the first country in terms of national highway total mileage. It marks a small crusher production will break through the total number of the world, including jaw crusher and other crushing equipment. Henan Hongxing Mining Machinery Co., Ltd. as the largest and most professional manufacturer in the domestic, with excellent quality and perfect service system, welcome new and old customers to negotiate business or purchase!

ultrafine grinding mill: http://www.jaw-breakers.com/T54.html

They’re so lovable and go along with anything.


When men and women are dehydrated, the symptoms feel like starvation. Consuming drinking water may well reduce starvation pangs and it has the additional advantage of flushing impurities from the system. Does that imply that you choose to can never take in ice product or pizza? No! That might be preposterous, specifically for a teenager! Just bear in mind that these foodstuff are to become eaten carefully.

Are you aware among the least complicated ways towards healthier weight loss is reducing part sizing. Many of us wouldn’t know a healthier part if it had been staring up at us from a plate, particularly if that plate was the dimensions of most dinnerware. As an alternative, swap your premier plates for some thing from the 7 to 9 inch diameter spot.

BackgroundYour mind utilizes neurotransmitters for example dopamine to manage psychological capabilities and converse with the system. Within an short article to the eNotAlone internet site, psychologist Joseph Carver states dopamine will allow your mind to manage psychological skills for example notice and inspiration. Dopamine also will allow your whole body to produce fluid motor actions.

But it is really not all undesirable, Muffin! Though your loved ones may need a tough time maintaining them selves slim, to suit your needs, it couldn’t be less difficult! You’ve got the most important weight loss gain at any time going to suit your needs – without these darned opposable FRUTA PLANTA REDUCE WEIGHT thumbs; you can’t make any midnight runs to the fridge, or sneak only one more cookie away from the deal with jar. Nope, like all of us canines, what you take in completely depends on what your human beings provide you. That may be the way you got fat, and that’s how one can obtain your cute little cocker spaniel system back again..

For each problem you can find generally an answer. It just depends on how much you have or are inclined to dedicate to the very same. Weight loss is likewise 1 these types of challenge, but in this case, most people want prompt benefits and need to shed these further lbs inside of the shortest span on time. Tea-Tea may be used in a smoothie as being a foundation liquid. Substitute drinking water, juice, or milk with cooled tea. Tea is prosperous in anti-oxidants, which protects the body from harmful no cost radicals.

The final aspect is always to think about purely natural dietary vitamin wellness dietary supplements. This is significant just since our foods doesn’t give every one of the natural vitamins God intended for us to obtain. But they’re to only nutritional nutritional supplement our taking in strategy and standard bodily schooling is critical to fulfill your fat reduction ambitions..

Talking about slender speedy food plan, generally they endorse to beverages in between 6 and 8 eyeglasses of drinking water just about every day. Drinks much drinking water might help your metabolism more quickly than usual. Beside 6 or 7 eyeglasses of drinking water, additionally, you will need to get going. The ever-increasing fashion of job orientation as well as a workaholic society has brought about an extended hiatus in terms of physical activities and workouts. Almost all of the populace is managing right after the materialistic and quick slice gains forgetting about their important wellness and physical fitness prerequisites. Equally as in United states, a study around the Australian wellness ailment also revealed that about 52% of Australian ladies and shut to 67% of Australian gentlemen, inside of the age of twenty five, had been struggling from acute being overweight.

I really like these Fruta Planta , I noticed them on the web and get them and match pretty much anything =]
I use my Fruta Planta for informal, comfort and ease carry. I really like them! Reduce Weight Fruta Planta